Mechanical Seal

To design and manufacture most appropriate Mechanical Seal suitable to any kind of critical-nature of fluids and run the pump trouble free.

To recondition your old Mechanical Seals of any make by grinding and lapping of Seal Faces, replacing secondary seals for Rotary and Stationary Faces, changing the springs, if required, and complete the seal to perform as good as new one.

We can offer our services for Refurbishment of Mechanical Seals, by changing/lapping of the seal faces(as required), changing of the O-Rings, changing of the springs (if required) and make these seals perform as good as new.

Another advantage of Refurbishing of Mechanical Seals is that instead of throwing away the old seal and replacing with a new one we can, together with inputs from the User, diagnose the cause of premature failure and do a Root Cause Analysis to change one or more of the following factors, such as MOC of Seal faces, MOC of O-Rings, MOC of Springs or the Compression given in the Mechanical Seal. This diagnosis and the corrective action taken will improve the performance and the service life of the Mechanical Seal considerably along with saving costs.

We have a good availability of Raw material such as Silicon Carbide Tubes, Carbon Tubes (Antimony and Resin Impregnated both), SS316 Bar-stock, ready Seal faces, O-Rings(Viton, Kalrez & EPDM), Springs(SS316 & Hast-C). Our fully equipped machine shop helps us to perform some of these jobs in a very short time so as to meet most of the urgencies.

Replacing the old/damaged Shaft, Sleeve, Mechanical Seal (new or refurbished as required), Bearings, Gaskets, adjustment of Impeller for better efficiency etc. and assembling the pump to put in line of operation.

We request you to give us an opportunity to prove our specialization with exceptionally excellent level of service which runs through our organization at all levels.

  • Type - 560

  • Type - 560

  • Type - 560

  • Type - M3

  • Type - M3

  • Type - M3

  • Type - 155

  • Type - 155

  • Type - CR

  • Type - CR

  • Type - CR

  • Type - MG

  • Type - MG

  • Type - MG

  • Type - MG

  • Flygt Pump Seals

  • Flygt Pump Seals

  • Flygt Pump Seals

  • Flygt Pump Seals

  • Flygt Pump Seals

  • Flygt Pump Seals

  • Type - TTH

  • Cartridge Seals

  • Type - 502

  • Grundfos Seals

  • Grundfos Seals

  • Grundfos Seals

  • PTFE

  • PTFE

  • PTFE

  • Honda FB

  • Honda FB

  • Multi Spring

  • Multi Spring

  • Wave Spring

  • Wave Spring

  • Wave Spring